how to

How to Start Your Own Mobile Bike Repair Business

IMG_20130923_090814_077.jpg

How to Start Your Own Mobile Bike Repair Business

Bike repair is a booming industry, so it’s no surprise that many people are looking to start offering this service as a side hustle. If you know a little about bikes and how they work, you’re ahead of the majority of the 100 million bicycle owners in America, many of whom will end up calling you for your repair service.


Here’s a step by step guide on how to start your own mobile bicycle repair business, even if you don’t have much capital or business expertise:

Step 1: Know Your Bicycle Stuff

As the business owner, you need to be the bicycle expert. People are entrusting their passion and safety to you, and you’ve got to be able to figure out problems, detect issues, and do a thorough repair job. Before you start spending money on your business, make sure you’re confident in the art of bike repair. Do some work on your own bike, or ask a local shop if you can apprentice for awhile until you’re confident that this is the business for you.

Step 2: Choose a Business Name

Ready to launch? If you want to be a legitimate business (and you should be), you’ll need to choose a unique business name and register it with the state. You’ll also need a business license from your local municipality, which may cost anywhere from $75 to $250.

Step 3: Make a Minimal Investment

Starting a mobile bicycle repair business means having the right tools and equipment in place so that when your first customer calls, you’ll be able to respond quickly. 


Early on, you may want to invest as little as possible to ensure this is something you plan on sticking with. At minimum, you’ll need the following:


  • Bicycle tools (hex keys, wrenches, pliers, ratchets, screwdrivers, wire cutters, tire spoon, chain cutters, pressure gauge, etc.)

  • Truing stand

  • Work stand

  • Accounting software (you can usually get this free online)

  • Business cards

  • Working capital to purchase parts

A list of the top 10 tools you will need right away can be found here BICYCLE MECHANIC 7 (8) TOOLS YOU CAN'T LIVE WITHOUT

HGC Mobile repair shop “big yellow”

HGC Mobile repair shop “big yellow”

Some mobile repair shops operate on four wheels (i.e. a truck), while others operate on two wheels (i.e. a bike with a tool trailer). If you decide to get a box truck to double as a workshop, you may be able to get low-cost financing through a credit union.

Step 4: Identify Your Target Market and Spread the Word

Your target is bicycle owners, so think about where you can connect with fellow cyclists who might need your services. Sporting good stores, local bike shops, gyms, athletic clubs, and local organizations are all good places to start connecting with your target market. Pass out business cards like it’s free money and start building word of mouth.

Step 5: Watch Your Profits

After you’ve been in business for awhile, make sure you’re actually making a profit and that the business is worth the time and money you’re spending on it. It’s easy to think you’re making money when people are buying your services, but a solid P&L may prove otherwise. If you find you aren’t generating enough revenue, see what you can do to change that if you want to stick with your business idea.


For more tips and inspiration, head back to the Homegrown Cycles blog!

How to fix a flat tire | Bicycle tire repair

1370917738045.jpg

Flat tires seem to happen at the worst times; but it doesn’t have to ruin your day or prevent you from starting or continuing your ride. The best way to prevent a bad ride experience is to be prepared! Every bike should have a saddle bag and in it should be a tube, multi tooltire lever, pumpand tire boot. Links are included for my personal favorite ride kit.


First things first, if the bike has been sitting for an extended period of time, tires may just need to be filled. Tubes leak air, even the new ones, so if they are flat don't assume they are bad. Fill them up, if they hold air overnight you’re probably good.

So, you’ve filled the tire and it doesn’t hold the air.  Now you know you have a hole but what to do next? Patch it or completely replace the tube.? Replace the tube! Patches are great if you don’t have a tube and need to get back on the road, but it is a temporary fix. If you need to patch, then use the park tool patches they never let me down. If your tire has a hole in it, replace the tire. If you’re on the road or trail and in a pinch, use a tire boot to cover the hole so the new tube won’t sneak out the hole and blow under pressure.

First thing you will need are a set of quality tire levers NEVER A SCREWDRIVER!  I recommend Pedros tire levers because they are tough and less prone to snapping under load. If you don’t have a set of plastic levers, use what you have on hand that will allow you to pry the tire bead from the rim.  Use extreme caution when reinstalling the new tube because it is easy to puncture the new tube.

Take the wheel off the bicycle by either loosening the bolts of the axle or opening the quick release lever. Typical axle bolts require a 15mm wrench, but an adjustable wrench will do. Avoid vice grips, channel locks, or anything with a toothed jaw as those tools will strip the flats of the bolt. If your bicycle has V brakes then the cable needs to be removed and the brake opened up. This allows the tire to fit past the brake pads when you install the wheel. Most road bikes will have a side pull caliper brake with a little lever that can be flipped and that will allow a fully inflated tire to easily pass through the pads.

Now you have the wheel off, use the tire lever and slip the smooth end of the lever under where the tire meets the rim. I usually twist or fold the tire to the opposite side of the rim to help loosen the metal bead of the tire and make a little room for the lever to fit under the tire bead. Once the lever is under the metal bead, push the lever all the way around the rim to free up or “unzip” the tire. Once you have one side freed from the rim, some tires will allow you to simply push the other tire bead over the rim; but if it is tight, use the lever and pry it off as necessary.

Tire is off. Great! If you can leave the tube in place inflate the tube with a pump (my go-to pump is the Topeak Joe Blow, it’s an affordable work horse that will last for years) and try and find the hole, this will make it easier if there is something small stuck in the tire. Now that you found the hole, inspect the tire near that location to see if there is road debris that needs to be removed. If you can’t find the hole, leave the tube in place within the tire, remove the tube and run your fingers through tire gently to feel if anything is still stuck in the tire (go slow the object is probably sharp ). Make sure to run your fingers through a few times in both directions, little metal wire has a tendency to lay flat and can easily be missed if your fingers run “with the grain.”  Turn the tire around and run your fingers through again and you may find what you missed the first time. Be extremely thorough, visually inspect the tire and feel through every inch until you are confident there is nothing left in the tire. If you inflate your new tube without checking the tire you will most likely have two flat tubes.

hidden problems under the rim strip

hidden problems under the rim strip

Make sure to also check the rubber rim strip that protects the inner tube from the heads of the spoke nipples. If the rubbr rim strip looks old and worn out change it. if you are in a pinch and do not have rim strips laying around a few layers of electrical tape will do the job.

The tire is clear, great! Now check the tire again!!  I can’t stress that enough.

Now, inflate new inner tube a little to give it shape and make it easier to install into the tire. I typically align the valve stem with the pressure stamp on the tire, this makes it easier to find how much pressure the tire needs the next time you inflate it.


Hidden piece of glass in tread of tire

Hidden piece of glass in tread of tire

With your tube lightly inflated fit it into the tire before mounting the tire on the rim. Pass the valve through the valve stem hole in the wheel and work one side of the tire onto the rim; start with the far side of the tire opposite the valve. Avoid using any tools to install the tire, try to pry the tire onto the rim using your hands as much as possible. If the tire is too tight, then use a tire lever but be careful it is easy to put a hole in the tube at this point. Make sure the tube isn’t getting pinched or sticking outside the rim and tire while you work the tire on all the way around. Install the wheel in the bike frame then pump up the tire. On some bikes you will not be able to get the inflated tire past the caliper brake; so it is best practice to install the wheel then inflate. Watch the tire as you inflate to make sure the bead is seated properly, if the tire starts to come off the rim let the air out fast to avoid blowing out a good tube.

Tire is on. tighten all the bolts or quick release, make sure the wheel is centered in the drop outs, and go ride!